How to maintain the import vacuum pump filter? Vacuum pump filter maintenance methods

Vacuum pump filter is a vacuum pump in the filtration equipment, filter is an important working part of the filter effect is mainly depends on the performance of the filter. So how to maintain and maintain the vacuum pump filter? How to maintain the imported vacuum pump filter? Vacuum pump filter maintenance methods Vacuum pump filter, the main filter in the operation of the vacuum pump in three forms: 1, air intake filter (which can effectively prevent the solid particles and fine ash is sucked into the vacuum pump to reduce mechanical wear and tear to improve operational reliability in the extension of the pump life But also can effectively protect the system components.) 2, the exhaust filter (taking into account the exhaust resistance, dust holding capacity, oil and gas separation performance, the three requirements of the legislation to achieve optimal balance of different internal and external locations to use different materials In order to achieve different separation purposes) 3, the oil filter (for the vacuum pump oil filter to extend the use of oil mainstream filter, installed in the oil Road) Use and maintenance methods: In the cleaning replacement, there are many people Not essentials, often spent in vain, but did not receive better results. 1, Loosen the knob bolt to separate the filter housing from the head. Be careful not to lose rubber seals and fibrous washers. 2, carefully remove the spring and felt pads, and then remove the paper over the core. 3, with a brush to remove the filter crease in the dust and foreign matter, and then gently tap the hand so that the remaining dust fall, wipe the dust on the inner wall of the shell and fiber mat. 4, according to the order of disassembly will have been cleaned or a new filter cartridge back. (Editor: Li Juan) Further reading: Pump and Valve Tube Fittings Exhibition Information 2016 Exhibition Information