CQB-type fluorine-driven magnetic pump driven pump noise is too large causes and solutions

CQB-type fluorine-lined magnetic drive pump pump is too much noise is one of the common failures, when this failure, we know where the reasons appear? How to solve it? With These questions, the following Xiaobian to give you a brief introduction CQB-type fluorine-driven magnetic pump pump too much noise and solutions. CQB type lined fluorine magnetic drive pump noise is too large reasons and solutions A CQB type lined fluorine magnetic drive pump noise too much reason 1, the shaft serious wear and tear; 2, the sleeve serious wear and tear; 3, drive magnet cup and isolation Set of contacts; 4, the rotating part and the fixed part of the friction; 5, suction head over or blocked at the end of the valve; 6, the pump is not fixed. Second, CQB lining fluorine fluorine magnetic drive pump too much noise solution 1, replace the pump shaft; 2, replace the wear and tear of the shaft sleeve; 3, adjust the gap between the magnetic cup and the isolation sleeve or replacement parts; 4, Pump repair or replacement parts; 5, reduce the location of the device or remove the blockage; 6, re-fixed the pump. Extended reading: China Construction Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Industry Exhibition Industry Interconnect (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http: //beng.liuti .cn / (Service Hotline:)